Trail Boss is designed specifically for low velocity lead bullet loads for Single Action shooting. It is based on a whole new technology which allows very high loading density, good flow through powder measures, stability in regard to temperature variation and most importantly, additional safety for the handloader.
ADI AR2206H has a burning rate slightly slower than AR2206 and is between AR2206 and AR2208. A very versatile powder in a range of calibres, giving outstanding accuracy.
Originally developed for the Australian Defence Force 5.56mm its burning rate lies between Bench Mark 1 and Bench Mark 2.
AR2219 provides top accuracy in small and medium capacity cartridges.
The ADI - BENCH MARK 8208 is a short-grained reloading powder well-recognized by professional shooters for its accuracy and stability over a wide temperature range. Bench Mark 8208 has a well-earned reputation, with consistent performance from lot to lot. This means a load developed for this powder will require less adjustment.
AVAILABILITY: FOR PICKUP ONLY.
the Adi-Bench Mark 2 is a fine-grained powder ideal for NRA match loads, including the 223 Remington with 68-69 grain bullets. It has a high bulk density and excellent metering capabilities. It has a similar burn rate to AR2206, but it may be faster depending on the calibre.
These rifle powders use single perforated tubular propellants with a single base composition, which makes them suitable for use in adverse weather conditions.
AVAILABILITY: FOR PICKUP ONLY.
the Adi Bench Mark 1 is a very fine-grained powder with very high bulk density and superior metering characteristics for use by bench rest shooters in cartridges such as .22 PPC. It is intermediate in a burning rate between AR2207 and AR2206.
AVAILABILITY: FOR PICKUP ONLY
A useful fine grained medium/slow burning rifle powder for medium sized cartridges such as .308 Winchester and 25-06 Remington. It’s burning rate is close to that of IMR 4064 but its bulk density is higher.
Has a burning rate slightly slower than AR2206 and is between AR2206 and AR2208. A very versatile powder in a range of calibres giving outstanding accuracy.
This moderately slow-burning, fine-grained rifle powder is beneficial for cartridges such as 22-250 Remington, .243 Winchester, .270 Winchester, 30-06 Springfield, and 300 Winchester Magnum.
Its burning rate is comparable to IMR 4350, but it has a slightly higher bulk density and meters more efficiently through a powder loader.
AVAILABILITY: FOR PICKUP ONLY
A slow burning rate rifle powder for cartridges such as .270 Winchester and 300 Winchester Magnum. AR2213SC replaced AR2213 in the Australian reloading market.
A very slow burning rate propellant optimised for the 300 Remington Ultra Magnum. It is also suitable for large capacity magnum cases and small overbore cartridges.
ADI AR2207 is a very useful fine-grained fast-burning rifle powder for cartridges. Its burning rate is close to that of IMR 4198 although it metres significantly better through standard powder loaders.
